Adhesive lined, heat shrink duct and vacuum tape specifically designed for sealing joints on spiral, flexible or flat oval ducts used in heating, ventilating, air conditioning and exhaust recovery systems.
Adhesive lined, heat shrink duct and vacuum tape specifically designed for sealing joints on spiral, flexible or flat oval ducts used in heating, ventilating, air conditioning and exhaust recovery systems.

● Eliminates air leakage in vacuum and ventilation systems
● Seals against moisture ingress and other contaminants
● Powerful adhesive bonds to galvanized steel, Aluminum and stainless steel
● Effective, reproducible seal allows for resistance to bending, vibrations and other mechanical
stresses over a wide range of temperatures
● Application procedure is quick, simple and clean
● Continuous operating temperature:-45℃-125℃
● Fully shrink temperature: 120℃
● Color: Black, Red, Green, Yellow
Technical Data
| Property | Test Method | Standard | Typical Performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥10.4 | 11.5 |
| Elongation(%) | ASTM D2671 | ≥300 | 450 |
| Tensile Strength after aging (MPa) | Ul224 158℃ X168hr | ≥7.3 | 8.5 |
| Elongation after aging(%) | Ul224 158℃ X168hr | ≥200 | 350 |
| Dieletric strength(kv/mm) | IEC 243 | ≥15 | 17.5 |
| Volume resistivity(Ω.cm) | ASTM D 876 | ≥1X1014 | 2.5X1014 |
Adhesive
| Property | Test Method | Standard |
| Water Absorption | ASTM D570 | ≤0.2% |
| Sofening Point (℃) | ASTM E28 | 95 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
| Spec | Width | Wall Thickness | Standard Lenghth(m) |
WRSJD-0825 | 25 | 0.80±0.10 | 5,10 |
WRSJD-0850 | 50 | 0.80±0.10 | 5,10 |
| WRSJD-08100 | 100 | 0.80±0.10 | 5,10 |
| WRSJD-1025 | 25 | 1.00±0.10 | 5,10 |
| WRSJD-1050 | 50 | 1.00±0.10 | 5,10 |
| WRSJD-10100 | 100 | 1.00±0.10 | 5,10 |