INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
TEILENUMMER
SBRS-(4X)GRO
Doppelwandige Produkte

4:1 shrink ratio High-Shrink-Ratio, High Viscosity, Adhesive-Lined, Polyolefin Heat Shrink Tubing

SBRS-(4X)GRO

High-Shrink-Ratio, High Viscosity, Adhesive-Lined, Polyolefin Heat Shrink Tubing

It consists of a double layer of cross-linked polyolefin and polyamide PA. The product has high shrinkage and wear resistance characteristics, and is widely used in electronic equipment wiring connections, automotive harnesses, home appliance harnesses, wire and cable branches, metal pipelines, wire and cable repairs, and other occasions that require sealing.

It consists of a double layer of cross-linked polyolefin and polyamide PA. The product has high shrinkage and wear resistance characteristics, and is widely used in electronic equipment wiring connections, automotive harnesses, home appliance harnesses, wire and cable   branches, metal pipelines, wire and cable repairs, and other occasions that require sealing.

07   SBRS-(4X)G.png


Features

● 4:1 shrink ratio allows for fewer sizes to cover numerous splice configurations and diameters.

● Thick adhesive liner forms an effective barrier against fluids and moisture penetration.

● Minimum shrink temperature: 70°C .

● Continuous operating temperature: -45°C to 125°C .

● Fully shrink temperature:125℃.

● Standard color: black , clear (other colors can be customized).

​Technical Data

PropertyTest MethodStandard
Tensile Strength(MPa)ASTM D2671≥10.4
Elongation(%)ASTM D2671≥200
Tensile Strength after aging (MPa)ASTM D 2671(158℃×168h)≥7.3
Elongation after aging(%)ASTM D 2671(158℃×168h)​≥100
Dieletric strength(kV/mm)IEC 60243≥15
Volume resistivity(Ω.cm)ASTM D876≥1X1014

Adhesive

PropertyTest MethodStandard
Water AbsorptionASTM D570<0.2%
Sofening Point (℃) ASTM E28100±5
Strength of peeling(PE) ASTM D 1000120N/25mm
Strength of peeling(AL)ASTM D 100080N/25mm


Specification Table

Dimensions

SizeExpandedAfter Recovery
mm

Inner Diameter

Min(mm)

Inner Diameter

Max(mm)

Total Wall 

Thickness(mm)

Adhesive 

Thickness(mm)

Φ4.00

4.00

1.00

1.40±0.30

0.70±0.20

Φ5.75

5.80

1.27

1.70±0.30

0.80±0.20

Φ7.40

7.40

1.65

2.00±0.30

0.95±0.20

Φ10.80

10.80

2.41

2.45±0.40

1.20±0.20

Φ12.00

12.00

2.41

2.45±0.40

1.20±0.20

Φ14.00

14.00

3.50

2.60±0.40

1.20±0.30

Φ16.00

16.00

4.00

2.70±0.40

1.35±0.30

​Φ17.78

17.80

4.20

2.70±0.40

1.35±0.30


Hinweis: INERGEK behält sich das Recht vor, bei Bedarf Änderungen vorzunehmen.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957
INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
TEILENUMMER
SBRS-(4X)GRO
Hinweis: INERGEK behält sich das Recht vor, bei Bedarf Änderungen vorzunehmen.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957